skoda Workshop Repair Guides

Skoda Workshop Service and Repair Manuals

ABOUT US
Removing and installing fuse holder > < Relay holder, fuse holder

Octavia Mk1

Removing and installing relay and fuse holder
Removing and installing relay and fuse holder
Removing:
  Note
The additional relay holder -A- is not generally fitted, yet only with the corresponding auxiliary equipment.
–  Remove the cover on the bottom left → Body work → Rep. Gr.70.
   
–  Loosen both fixing screws -C- (2 Nm), if necessary, loosen all screwed connections -D-.
–  Pull out the relay and the control units then unclip the relevant relay carrier.
–  Remove relay holder -B- and additional relay holder -A- downwards.
Installing:
–  Carry out the installation in the same way in reverse order.
  Note
The assignment of the relay and fuse holder can always be taken from the valid current flow diagram → Current Flow Diagrams, Electrical Fault Finding, Fitting Locations.
  S97-0289

Removing and installing fuse holder > < Relay holder, fuse holder