Skoda Workshop Service and Repair Manuals > Octavia Mk1 > Power unit | 1,6/74; 75 kW MPI engine | Engine cylinder head, valve gear | Removing and installing the cylinder head | Removing and installing the cylinder head - engines with identification characters AVU, BFQ

Removing and installing the cylinder head - engines with identification characters AVU, BFQ

Special tools and workshop equipment required

t	Threaded part -T30011/2A (3450/2A)-

t	Removal tool -T30011/3 (3450/3)-

t	Extractor -T10112-

t	Socket insert -T10070-

t	Catch pan, e.g. -VAS 6208-

t	Pliers for spring strap clamps

Requirements

l	Engine temperature not above 30 °C.

Note

t	If the battery is disconnected and reconnected, carry out certain additional operations → Electrical System; Rep. gr.27.

t	All cable straps which are detached or cut open when removing, should be fitted on again in the same place when installing.

Skoda Workshop Service and Repair Manuals