| Removing and installing the cylinder head |
| Removing and installing timing belt → Chapter. |
Note | t
| Always replace cylinder head bolts. |
| t
| Always replace self-locking nuts. |
| t
| Always replace the seals and gaskets during assembly work. |
| t
| When installing a cylinder head, all the contact surfaces between the hydraulic tappets, roller rocker arms and the cam tracks must be oiled before installing the cylinder head cover. |
| t
| Do not remove the plastic bases supplied as a protection for the open valves until just before fitting on the cylinder head. |
| t
| If the cylinder head is replaced, the system must be completely filled with fresh coolant. |
|
|
|
