Octavia Mk2
| Summary of components of front bumper (Octavia II) for vehicles as of 11.08 |
| 1 - | Adjusting nut |
| 2 - | 1 Nm |
| 3 - | Guide part |
| Removing: |
| – | Remove front bumper (Pos. 5). |
| – | Remove screws (Pos. 13). |
| – | Remove guide part. |
| Installing: |
| – | Installation is carried out in the reverse order. |
| 4 - | 2 Nm |
| 5 - | Front bumper |
| Removing: |
| – | Remove front headlights → Electrical System → Rep. gr.94. |
| – | Remove covers (Pos. 7). |
| – | Remove fog and daylight driving lights (Pos. 6) → Electrical System → Rep. gr.94. |
| – | Remove expanding rivets (Pos. 9). |
| – | Remove screws (Pos. 2 and Pos. 10). |
| – | Remove screws (Pos. 4 and Pos. 12). |
| – | Remove the bumper from the guide parts (Pos. 3) to the front. |
Note| Before removing the bumper it is necessary to disconnect plug of park sensors and hoses for the headlight cleaning system (if present). |
| Installing: |
| – | Installation is carried out in the reverse order. |
| 6 - | Fog and daylight driving lights |
| – | Remove and install → Electrical System → Rep. gr.94 . |
| 7 - | Cover |
| 8 - | Ventilation grid |
| 9 - | Body-bound rivet |
| 10 - | 2 Nm |
| 11 - | Holder for headlight cleaning system and fog lights |
| 12 - | 6.5 Nm |
| 13 - | 1.5 Nm |
