Octavia Mk2
| Summary of components of front bumper (Octavia II) for vehicles up to 10.08 |
| 1 - | Guide part |
| Removing: |
| – | Remove front bumper (Pos. 7). |
| – | Remove screws (Pos. 2). |
| – | Remove guide part. |
| Installing: |
| – | Installation is carried out in the reverse order. |
| 2 - | 1.5 Nm |
| 3 - | Adjusting nut |
| 4 - | 1 Nm |
| 5 - | 1.5 Nm |
| 6 - | Body-bound rivet |
| 7 - | Front bumper |
| Removing: |
| – | Remove front headlights → Electrical System → Rep. gr.94. |
| – | Remove covers (Pos. 8). |
| – | Remove expanding rivets (Pos. 6). |
| – | Remove screws (Pos. 4 and Pos. 5). |
| – | Remove screws (Pos. 12). |
| – | Remove the bumper from the guide parts (Pos. 1) to the front. |
Note| Before removing the bumper it is necessary to disconnect plug of fog lights, of park sensors and of hoses for the headlight cleaning system (if present). |
| Installing: |
| – | Installation is carried out in the reverse order. |
| 8 - | Cover |
| 9 - | Bumper strip |
| q | Pressed on into the bumper clips. |
| q | Is a component part of the front bumper (Octavia II RS) |
| 10 - | Spoiler |
| q | Pressed on into the bumper clips |
| q | Is a component part of the front bumper (Octavia II RS) |
| 11 - | Ventilation grid |
| 12 - | 6.5 Nm |
