Skoda Workshop Service and Repair Manuals
HOME
FEATURES
MENU
INDEX
ABOUT US
Brakes, hydraulics, regulator, servo >
< Setting, removing and installing the brake light switchF and brake pedal switchF47 until 10.05
Octavia Mk2
Brake systems
Brake, brake mechanics
Brake pedal - Vehicles with right-hand drive
Removing and installing brake light switch F and brake pedal switch F47 as of 11.05
Removing and installing brake light switch F and brake pedal switch F47 as of 11.05
Removing and installing brake light switch -F- and brake pedal switch -F47- as of 11.05
Special tools and workshop equipment required
t
Brake filling and bleeding device e.g. -VAS 5234-.
Removing:
For engines TDI PD and TDI CR
–
Remove master brake cylinder
→ Chapter
–
Screw out screw
-2-
from master brake cylinder.
–
Take switch
-3-
out of the lock
-4-
.
Installing:
Installation is carried out in the reverse order.
–
After completing work which involved opening the brake system, bleed brake system with brake filling and bleeding device, e.g. -VAS 5234-.
Tightening torque:
Brake light switch -F- and brake pedal switch -F47- to brake cylinder
5 Nm
Inspection:
→ Vehicle diagnostic tester
Brake systems
Brake, brake mechanics
Brake pedal - Vehicles with right-hand drive
Removing and installing brake light switch F and brake pedal switch F47 as of 11.05
Brakes, hydraulics, regulator, servo >
< Setting, removing and installing the brake light switchF and brake pedal switchF47 until 10.05