Octavia Mk2
| Parts of cooling system on the side next to the body - Summary of components |
Note| This engine is equipped with an additional radiator for coolant of charge air system → Chapter. |
| 1 - | Radiator |
| q | removing and installing → Chapter |
| q | after replacing fill entire system with fresh coolant |
| 2 - | O-ring |
| q | replace if damaged |
| 3 - | Top coolant hose |
| q | To connection fitting at cylinder head |
| q | connection diagram for coolant hoses → Chapter |
| 4 - | Coolant hose |
| q | to the expansion reservoir |
| 5 - | Spring strap clamp |
| q | use spring strap clips, e.g. -VAS 6340-, for removing and installing |
| 6 - | Coolant hose |
| q | to coolant pipe for additional radiator for coolant of charge air system |
| 7 - | Connecting pipe |
| 8 - | Expansion reservoir |
| q | with coolant shortage warning light sender -G32- |
| q | Check the cooling system for tightness → Chapter |
| 9 - | Connector |
| 10 - | Screw cap |
| q | Testing the pressure relief valve in the cap → Chapter |
| 11 - | 3 Nm |
| 12 - | Plastic inserts |
| q | for fixing screws |
| 13 - | Support |
| 14 - | Fan shroud |
| q | removing and installing → Chapter |
| 15 - | 5 Nm |
| 16 - | Right radiator fan -V35- |
| q | removing and installing → Chapter |
| 17 - | Connector |
| 18 - | Radiator fan -V7- |
| q | with radiator fan control unit -J293- |
| q | removing and installing → Chapter |
| 19 - | Support |
| q | for connector |
| 20 - | Bottom coolant hose |
| q | to the connection fitting for the coolant regulator |
| 21 - | Clamp |
| q | check tightness |
| 22 - | Coolant temperature sender at radiator outlet -G83- |
| 23 - | 5 Nm |
| 24 - | 5 Nm |
| q | Fitted to additional radiator for coolant of charge air system → Chapter |
