skoda Workshop Repair Guides

Skoda Workshop Service and Repair Manuals

Connection diagram for coolant hoses > < Testing oil pressure and oil pressure switch
Cooling system
Cooling system
  WARNING
Hot steam may escape when the compensation bottle is opened.
t  Wear safety goggles and safety clothing, in order to avoid eye injuries and scalding.
t  Cover the cap with a cloth and open carefully.
  Note
t  When the engine is warm the cooling system is under pressure. If necessary reduce pressure before repairs.
t  The hose connections are secured with spring-type clips. In case of repair only assign the spring strap clamps via the → Electronic catalogue of original parts.
t  Use pliers for spring strap clamps to fit the spring strap clips.
t  Always replace seals and gasket rings.
t  When installing fit the coolant hoses free of stress, without them touching any other components (pay attention to the marking on the coolant connection and hose).
t  The arrows which are on the coolant pipes and the coolant hose ends must stand opposite to each other.
   

Connection diagram for coolant hoses > < Testing oil pressure and oil pressure switch