Octavia Mk2
| Summary of components for engine with identification characters BLS |
Note| The actuation of the exhaust gas recirculation system is performed by the engine control unit -J248- for the EGR valve -N18- with EGR potentiometer -G212- and EGR control motor -V338-. |
| 1 - | Coolant hose |
| q | to connection fitting |
| q | connection diagram for coolant hoses → Chapter |
| 2 - | Gasket |
| q | replace |
| 3 - | 22 Nm |
| 4 - | Connecting pipe |
| 5 - | from exhaust manifold |
| 6 - | 25 Nm |
| q | replace |
| 7 - | to connection of exhaust gas recirculation valve -N18 - with EGR potentiometer -G212- and EGR control motor -V338- |
| 8 - | Radiator |
| q | for exhaust gas recirculation |
| q | removing and installing → Chapter |
| 9 - | 10 Nm |
| 10 - | Coolant hose |
| q | from the coolant pipe at the rear |
| q | connection diagram for coolant hoses → Chapter |
| 11 - | Connecting hose |
| 12 - | Changeover valve for radiator of exhaust gas recirculation -N345- |
| 13 - | Connecting pipe |
| 14 - | Vacuum setting element |
| q | for recirculation flap |
| q | always replace together with radiator for exhaust gas recirculation |
| q | Connection diagram → Chapter |
