| Removing and installing parts of the exhaust system |
Note | t
| Vehicles with the engine identification characters BLY and BVZ omply with exhaust emission standard EU 2. On these vehicles, certain exhaust gas relevant components are not fitted, such as exhaust gas recirculation system, NOx-sensor control unit -J583-, lambda probe 2 -G108 - and lambda probe 2 downstream of catalytic converter -G131-. Observe this during the installation. |
| t
| Replace the gaskets and the self-locking nuts. |
| t
| After performing installation work on the exhaust system, make sure the exhaust system is not mounted under tension and has adequate clearance from the vehicle body. If necessary, slacken the clamping sleeve and align the front and middle part of the exhaust system so as to create adequate clearance to the vehicle body and that the weight of the exhaust system is evenly distributed over the hangers. |
|
|
|
