Octavia Mk2
| Exhaust gas system - Summary of components |
| 1 - | Gasket |
| q | replace |
| 2 - | Lambda probe -G39-, 55 Nm |
| q | the thread of new lambda probes must be coated with assembly paste |
| q | for re-used lambda probe, only coat the thread with hot bolt paste -G 052 112 A3-; the hot bolt paste -G 052 112 A3- must not get into the slots of the probe body |
| 3 - | 40 Nm |
| q | replace |
| q | Coat pin screws of exhaust manifold with hot bolt paste -G 052 112 A3- |
| 4 - | Front part of exhaust system |
| q | with catalytic converter |
| q | protect against shocks and blows |
| q | with decoupling element |
| q | do not twist decoupling element more than 10° - risk of damage |
| q | removing and installing → Chapter |
| q | Align exhaust system free of stress → Chapter |
| 5 - | Lambda probe downstream of catalytic converter -G130-, 55 Nm |
| q | the thread of new lambda probes must be coated with assembly paste |
| q | for re-used lambda probe, only coat the thread with hot bolt paste -G 052 112 A3-; the hot bolt paste -G 052 112 A3- must not get into the slots of the probe body |
| 6 - | Front clamping sleeve |
| q | align exhaust system free of stress before tightening → Chapter |
| q | Fitting position → Chapter |
| q | Tighten screwed connections uniformly |
| 7 - | 23 Nm |
| 8 - | Hanger |
| 9 - | Front tunnel bridge |
| 10 - | Retaining strap |
| q | replace if damaged |
| 11 - | Rear part of exhaust system |
| q | for first equipment building unit with the middle part of the exhaust gas system, replace individually when carrying out repairs |
| q | Align exhaust system free of stress → Chapter |
| q | Separate the exhaust system → Chapter |
| 12 - | Hanger |
| q | replace if damaged |
| 13 - | 23 Nm |
| 14 - | Rear clamping sleeve |
| q | for individually replacing the middle and rear part of the exhaust system |
| q | Fitting position → Chapter |
| q | Tighten screwed connections uniformly |
| 15 - | Rear tunnel bridge |
| 16 - | Middle part of exhaust system |
| q | for first equipment building unit with the rear part of the exhaust gas system, replace individually when carrying out repairs |
| q | Align exhaust system free of stress → Chapter |
| q | Separate the exhaust system → Chapter |
| 17 - | Hanger |
| q | replace if damaged |
