skoda Workshop Repair Guides

Skoda Workshop Service and Repair Manuals

ABOUT US
Hose connections with push-fit couplings > < Charge air cooling - Summary of components

Octavia Mk2

Removing and installing charge air cooler
Removing and installing charge air cooler
Removing
–  Removing coolant cooler → Chapter.
–  Remove front bumper → Body Work → Rep. Gr.63.
–  Remove the charge air hose on the left from the charge air cooler.
–  Release the screws of the brackets for charge air cooler ( → Chapter, position 1).
  WARNING
Do not open the refrigerant circuit of the air conditioning system.
  Caution
To avoid causing damage to the condenser and to the refrigerant lines and hoses make sure the lines and hoses are not over-extended, kinked or bent.
  Note
For the following work, a second mechanic is required to hold the charge-air cooler.
–  Swivel the charge air cooler towards the rear, remove the lateral brackets for charge air cooler and unhook out of the lower bearings.
   
–  Release the securing bolts -arrows- of the condenser.
–  Remove charge air cooler downwards.
Install
Installation occurs in reverse order to removal. Pay attention to the following:
t  Observe the assembly instruction for hose connections with push-fit couplings → Chapter.
  A19-10274

Hose connections with push-fit couplings > < Charge air cooling - Summary of components