–
| Fit assembly device for valves -2036- with the retaining plates -2036/1-, as shown, onto the bearing frame of the cylinder head. |
Note If the fixing plates -2036/1- cannot be fitted due to the exhaust gas recirculation radiator, place large body washers underneath. |
Caution If the unit injector is pulled down by the fixing screws, there is the risk that the unit injector is pulled skewed into its seat. This can result in poor vehicle handling and starting problems. For this reason the unit injector must be pressed into its seat and must only then be screwed on. |
|
|
|
|