–
| Disconnect plug -A- from the ceramic pencil type glow plugs. |
–
| Disconnect plug -B- from the unit injectors using the extractor -T10312- → Anchor. |
Caution To remove and install the unit injectors, the screws for the retaining clips must be loosened or tightened. If the electrical wiring loom is loosened from the retaining clips, they can be bent and it can lead to cable fracture due to high play. |
|
–
| Release screws -arrows- at the retaining clips and lay the complete electrical wiring loom to the side. |
|
|
|