skoda Workshop Repair Guides

Skoda Workshop Service and Repair Manuals

ABOUT US
Installing the engine > < Removing and installing engine trim panel

Octavia Mk2

Securing the engine to the assembly stand
Securing the engine to the assembly stand
Special tools and workshop equipment required
t  Lifting device -MP 9-201 (2024A)-
t  Engine mount -MP 1-202 (VW 540)-
t  Hook -MP 1-202/10-
t  Bushing -T30010 (VW 540/1B)-
t  Assembly stand -MP 9-101-
t  Workshop crane, e.g. -VAS 6100-
Procedure
l  Separate engine from gearbox.
  WARNING
Use securing pins on the hooks and rig pins to prevent release.
   
–  Attach lifting device -MP 9-201- at engine and at workshop crane e.g. -V.A.G 1202A-.
Belt pulley side: 2nd hole of the attachment in Position 1.
Flywheel side: 4th hole of the attachment in Position 8.
–  Lift off engine with installed engine mount -T10012- with workshop crane from engine and gearbox jack.
–  Remove engine mount -T10012 -.
  S10-0175
–  For carrying out assembly work, attach the engine with the engine mount -MP 1-202-, the extension -MP 1-202/10- and the sleeves -T30010- to the assembly stand -MP 9-101-. (The figure shows the 1.9 ltr./47kW SDI Engine; the fixing system is identical).
  S10-0123

Installing the engine > < Removing and installing engine trim panel