Octavia Mk2
| Removing and installing parts of the charge air cooling for engine with engine identification characters BMM |
Note| t | Before testing or repairing check all hoses and lines for tight connection and leaktightness. |
| t | Hose connections and hoses for charge air system must be free of oil and grease before being installed. |
| t | Secure all hose connections with corresponding hose clips. |
| 1 - | 5 Nm |
| 2 - | Support |
| q | Check fitting position |
| 3 - | Charge air cooler |
| q | removing and installing → Chapter |
| 4 - | top seal |
| q | placed onto charge air cooler |
| 5 - | 3 Nm |
| 6 - | Charge pressure sender -G31-/Intake air temperature sender -G42- |
| 7 - | O-ring |
| q | replace if damaged |
| 8 - | Support |
| 9 - | 5 Nm |
| 10 - | Connecting hose |
| 11 - | Charge air pipe |
| 12 - | Connecting hose |
| q | for intake manifold flap motor -V157- |
| 13 - | 8 Nm |
| 14 - | Connecting hose |
| q | from exhaust turbocharger |
| 15 - | bottom seal |
| q | placed onto charge air cooler |
