skoda Workshop Repair Guides

Skoda Workshop Service and Repair Manuals

ABOUT US
Removing and installing series resistor for fresh air blower with overheating fuseN24 > < Removing and installing parts of the heater unit - Part 2

Octavia Mk2

Removing and installing fresh air blowerV2
Removing and installing fresh air blower -V2-
Removing
The fresh air blower -V2- is accessible from the front passenger side of the footwell.
–  Remove glove compartment on front passenger side → Body Work → Rep. gr.70.
   
–  Remove shield -1- from heater unit → Chapter and footwell vent on front passenger side → Chapter.
–  Separate plug connection -3- at the fresh air blower -V2-.
–  Unscrew screw -4- for fresh air blower -V2-, if present.
–  Release catch -2- and turn fresh air blower -V2- in direction of -arrow- and remove.
Install
Installation is carried out in the reverse order.
  Note
If the catch -2- is defective, screw in screw -4- (1 Nm).
  S80-0119

Removing and installing series resistor for fresh air blower with overheating fuseN24 > < Removing and installing parts of the heater unit - Part 2