skoda Workshop Repair Guides

Skoda Workshop Service and Repair Manuals

ABOUT US
Removing and installing heater control > < Removing and installing fresh air blowerV2

Octavia Mk2

Removing and installing series resistor for fresh air blower with overheating fuseN24
Removing and installing series resistor for fresh air blower with overheating fuse -N24-
Removing
  DANGER!
The series resistor for fresh air blower with overheating fuse -N24- can be hot - risk of burning!
Before removing the series resistor for fresh air blower with overheating fuse -N24-, allow it to cool down.
–  Remove shield from heater unit → Chapter.
   
–  Disconnect plug connection at series resistor for fresh air blower with overheating fuse -N24--1-.
–  Press the catch in -the direction of the arrow- and take the series resistor for fresh air blower with overheating fuse -N24- out of the heater unit.
Install
Installation is carried out in the reverse order.
  S80-0122

Removing and installing heater control > < Removing and installing fresh air blowerV2