| The functions of the anti-theft warning system are integrated: |
| l
| Vehicles up to MY 2008 - in the Convenience system central control unit -J393- |
| l
| Vehicles as of MY 2009 (Facelift) - in the vehicle voltage control unit -J519- |
| After replacing the Convenience system central control unit -J393- or the vehicle voltage control unit -J519-, the anti-theft warning system must be adapted with the → Vehicle diagnostic tester. |
| Further information and description of function: |
| Fault recognition and fault display |
| The anti-theft warning system is equipped with self-diagnosis, which facilitates the troubleshooting. |
Note | t
| After triggering the anti-theft warning system, the alarm source which is stored in the Convenience system central control unit -J393- or the vehicle voltage control unit -J519- can be output. For determining the alarm source, use the → Vehicle diagnostic tester in the function „Targeted functions“ - „measured value blocks“. |
| t
| Before assembly, the vehicle must be unlocked with the release button of the radio control receiver. |
|
|
|
