skoda Workshop Repair Guides

Skoda Workshop Service and Repair Manuals

ABOUT US
Removing and installing interior monitoring sensorG273 and vehicle inclination senderG384 > < General points

Octavia Mk2

Removing and installing the hornH12
Removing and installing the horn -H12-
  Note
The horn -H12- has an emergency battery which cannot be replaced as a separate item.
Removing
–  Switch off the ignition and all electrical components. The vehicle must not be locked via the radio control receiver of the central locking.
–  Remove the front right wheelhouse liner → Body Work; Rep. gr.66.
   
–  Unscrew nuts -arrows B-.
–  Bore out rivet head or pull-off screw -arrow A-.
–  Disconnect the plug connection.
–  Remove alarm horn from holder.
Install
  Note
If the pull-off screw is bored out, replace the rivet nut.
–  Installation is carried out in the reverse order.
  S94-0183

Removing and installing interior monitoring sensorG273 and vehicle inclination senderG384 > < General points