General notes on the injection system |
t
| The engine control unit is equipped with self-diagnosis. Before repairs as well as for fault finding first interrogate the fault memory → Vehicle diagnostic tester. |
t
| Fuel hoses in the engine compartment must be secured with spring band clamps. The use of clamp-type or screw-type clips is not allowed. |
t
| A minimum voltage of 11.5 V is required for perfect functioning of the electrical components. |
t
| Do not use sealants containing silicone. Traces of silicone elements drawn in by the engine are not burnt in the engine and damage the lambda probes. |
t
| Certain inspections may cause the control unit to detect and store a fault. It is therefore necessary to interrogate the fault memory after having completed all inspections and repairs, and if necessary delete → Vehicle diagnostic tester. |
|
|
|