Superb
| Summary of components of fuel filter |
| 1 - | 10 Nm |
| 2 - | Support |
| q | for fuel filter |
| 3 - | Retaining clip |
| 4 - | Return-flow line |
| q | from the injection pump |
| 5 - | Regulating valve |
| q | Fitting position: Arrow direction to the fuel tank |
| q | remove the holding clamp when changing the fillter and remove regulating valve with the connected fuel lines |
| q | for a temperature of less than + 15°C: |
| access to filter open |
| q | for a temperature above + 31°C: |
| access to filter closed |
| 6 - | Return-flow line |
| q | to fuel tank |
| 7 - | Feed line |
| q | from fuel tank |
| 8 - | Water drain plug, 4 Nm |
| 9 - | Sealing ring |
| q | replace |
| 10 - | Fuel filter |
| q | the direction of flow is marked by arrows |
| q | do not interchange connections |
| q | Pay attention to change interval → Superb |
| q | fill with diesel fuel before fitting |
| 11 - | Feed line |
| q | to the injection pump |
| 12 - | Plastic insert |
| q | push onto the fuel filter |
| 13 - | 10 Nm |
