skoda Workshop Repair Guides

Skoda Superb Workshop Service and Repair Manuals

ABOUT US
Setting the headlight beam > < Summary of components

Removing and Installing Headlight: Step-by-Step Guide

Removing and installing headlight
Removing and installing headlight
Removing
  Note
The procedure for removal and installing illustrates the left headlight as an example. The procedure for removal and installing is identical for the right headlight.
–  Remove front bumper → Body Work; Rep. Gr.63.
–  Remove the headlight support (under the headlight).
   
–  Remove screws -arrows- (2,4 Nm).
–  Disconnect the plug connector for the headlight, pull the headlight forwards carefully and then remove in an upwards direction.
–  Remove the hose at the lift cylinder for the headlight cleaning system if present.
Install
  Note
Always align the headlight according to the contours of the vehicle body (the gap size) and fix in place.
–  Installation is carried out in the reverse order.
–  Set up the headlight → Chapter.
  S94-0126

Setting the headlight beam > < Summary of components