Yeti
Summary of components of tailgate lock |
1 - | Registration number lighting |
– | Removing and installing → Electrical System; Rep. gr.94. |
2 - | Adjusting nut |
– | For number plate holder. |
3 - | Tailgate release switch |
Removing: |
– | Removing bottom trim panel for tailgate → Chapter. |
– | Unplug connector -4-. |
– | Remove fixing nuts -5- and take off fixing shell -6-. |
– | Take the switch out of the tailgate. |
Installing: |
– | Installation is carried out in the reverse order. |
4 - | Connector |
– | For tailgate release switch -3-. |
5 - | Nut, 6 Nm |
6 - | Fixing shell |
7 - | 20 Nm |
8 - | The tailgate lock |
Removing: |
– | Removing bottom trim panel for tailgate → Chapter. |
– | Disconnect the plug of the tailgate lock. |
– | Remove fixing screws -7- and take out flap lock. |
Installing: |
– | Installation is carried out in the reverse order. |
9 - | 20 Nm |
10 - | Latch striker |
– | Bonnet must be adjusted flush to the body. |
– | The bonnet must open and close free of stress. |