skoda Workshop Repair Guides

Skoda Workshop Service and Repair Manuals

ABOUT US
Removing and installing left vent temperature senderG150 and right vent temperature senderG151 > < Removing and installing left footwell vent temperature senderG261

Yeti

Removing and installing Right footwell vent temperature senderG262
Removing and installing Right footwell vent temperature sender -G262-
Removing
–  Left-hand drive - remove the storage compartment in the dash panel on the front passenger side → Body Work; Rep. gr.70.
–  Right-hand drive - remove lower part of the dash panel insert on the driver's side → Body Work; Rep. gr.70.
   
–  Disconnect plug connection -1-.
–  Rotate sender -2- by 90° -arrow- and take out.
Install
Installation is performed in the reverse order, pay attention to the following points:
–  Pay attention to correct seating of gasket ring -3-.
  S87-0240

Removing and installing left vent temperature senderG150 and right vent temperature senderG151 > < Removing and installing left footwell vent temperature senderG261