Skoda Yeti Climatronic - Removing and installing left vent temp sender

Removing and installing left footwell vent temperature senderG261

Removing and installing left footwell vent temperature sender -G261-

Removing

–	Switch off the ignition and all electrical components.

–	Left-hand drive - remove dash panel insert → Electrical System; Rep. gr.90.

–	Right-hand drive - remove storage compartment on front passenger side → Body Work; Rep. gr.70.

–	Rotate sender -2- by 90° and take out.

–	Disconnect plug connection -1-.

Install

Installation is performed in the reverse order, pay attention to the following points:

–	Pay attention to correct seating of gasket ring -3-.

Skoda Yeti Service and Repair Manuals | Workshop Guides