Yeti
| Disassembling and assembling (Climatronic) the air conditioning unit |
| 1 - | Front air distribution flap control motor -V426- |
| q | removing and installing → Chapter |
| 2 - | Left temperature flap control motor -V158- |
| q | removing and installing → Chapter |
| 3 - | Defroster flap control motor -V107- |
| q | removing and installing → Chapter |
| 4 - | Support |
| 5 - | Control motor of air flow flap and re-circulating air flap -V425- |
| q | removing and installing → Chapter |
| 6 - | Housing for air inlet |
| q | with re-circulating air flap |
| q | with stored pressure flap (Climatronic) |
| 7 - | Housing - top part |
| 8 - | Housing - bottom part |
| 9 - | Evaporator |
| q | removing and installing → Chapter |
| 10 - | Hose for glove compartment cooling |
| 11 - | Fresh air blower -V2- with fresh air blower control unit -J126- |
| q | Removing and installing fresh air blower → Chapter |
| q | Removing and installing fresh air blower control unit → Chapter |
| 12 - | Dust and pollen filter |
| q | Also filter version with odour insert, see → Catalogue of Original Parts |
| q | with activated charcoal filter |
| q | removing and installing → Chapter |
| 13 - | Cover |
| q | for dust and pollen filter |
| 14 - | Heat exchanger |
| q | removing and installing → Chapter |
| 15 - | Heat exchanger trim panel |
| 16 - | Heating element for air auxiliary heating -Z35- |
| q | only fitted to certain models |
| q | removing and installing → Chapter |
| 17 - | Right temperature flap control motor -V159- |
| q | removing and installing → Chapter |
| 18 - | Distributor housing |
