| Setting middle position of the restoring ring with coil spring |
| It is only carried out if there is a doubt about the correct setting of the centre position for the restoring ring rotor. |
| –
| Put the front wheels in straight ahead position. |
| –
| Slowly turn the ring rotor manually to the right up to the stop. |
| –
| Slowly turn the ring rotor manually to the left up to the stop and count the turns. |
| –
| Slowly turn the ring rotor to the right by half of the counted turns in the centre position (top connector must be in horizontal position). |
| –
| Install steering wheel → Body Work; Rep. gr.69, if necessary lock ring rotor with transport security or adhesive tape. |
|
|
|
