Skoda Workshop Service and Repair Manuals > Yeti > Vehicle electrics | Electrical System | Lights, lamps, switches outside

Removing and installing the turn signal light in the exterior mirror

Removing

–	Switch off the ignition and all electrical components.

–	Remove mirror glass → Body Work; Rep. gr.66.

–	Slacken the top exterior mirror cover -1- from the catches -arrows- and carefully remove it.

–	Release screws -2- (0,8 Nm).

–	Lower the bottom part of the exterior mirror -2- downwards.

–	Unlock the plug connection -3- and disconnect.

Note

In the event of a fault of the turn signal light, the complete bottom part of the exterior mirror -2- must be replaced.

Install

Installation is performed in the reverse order, pay attention to the following points:

–	Perform a functional test (illumination, mirror adjustment).

Skoda Workshop Service and Repair Manuals