skoda Workshop Repair Guides

Skoda Workshop Service and Repair Manuals

ABOUT US
Contact assignment on the steering column electronics control unitJ527 > < Removing and installing restoring ring with coil springF350 with integrated steering column electronics control unitJ527

Yeti

Removing and installing steering column combination switch
Removing and installing steering column combination switch
Removing
  Note
The steering column is not shown in the illustration for purposes of clear presentation.
–  Remove steering wheel → Body Work; Rep. gr.69. Before the steering wheel is removed from the steering column, the wheels must be in the straightahead position.
–  Removing top and bottom steering column trim → Body Work; Rep. gr.70.
–  Remove restoring ring with coil spring → Chapter.
   
–  Insert a small cross-head screwdriver through the opening -arrow A- and unlock the bottom catch peg.
–  Press the top catch pegs -arrows B- and push the combination switch -1- out of the bearing on the steering lock -arrows C-.
Install
Installation is performed in the reverse order, pay attention to the following points:
–  Make sure that all the retaining lugs and plug connections lock in place correctly.
  S94-0344

Contact assignment on the steering column electronics control unitJ527 > < Removing and installing restoring ring with coil springF350 with integrated steering column electronics control unitJ527