skoda Workshop Repair Guides

Skoda Workshop Service and Repair Manuals

ABOUT US
Removing and installing lamp holder > < Tail lights

Yeti

Removing and installing the tail light
Removing and installing the tail light
Removing
–  Switch off the ignition and all electrical components.
   
–  Release the screws -1- (2.5 Nm) and loosen the light -2- towards the rear -arrow- out of the holding parts -3-.
–  Unplug connector -4-.
Install
Installation is carried out in the reverse order.
  S94-0334

Removing and installing lamp holder > < Tail lights