Baja F4-2.5L SOHC (2003)
Tightening torque: 19 N.m (1.9 kgf-m, 13.7 ft-lb)
10. Tighten two bolts which install fuel pipes on the left side of intake manifold.
Tightening torque: 5.0 N.m (0.51 kgf-m, 3.7 ft-lb)
11. Install purge control solenoid valve.
Tightening torque: 16 N.m (1.6 kgf-m, 11.8 ft-lb)
12. Connect hoses to purge control solenoid valve.
CAUTION: Connect evaporation hoses as shown in the figure.
13. Install engine harness onto intake manifold.
14. Connect connectors to fuel injectors and purge control solenoid valve.