Forester F4-2.5L SOHC (2004)
4. Apply fluid packing to the mating surfaces and install oil pan.
Fluid packing: Parts No. 004403007 THREE BOND 1215 or equivalent
5. Tighten the bolts which install the oil pan onto engine block.
Tightening torque: 5 Nm (0.5 kgf-cm, 3.6 ft. lbs.)
6. Lower the engine onto front crossmember.
7. Tighten the nuts which install front cushion rubber onto front crossmember.
Tightening torque: 69 Nm (7.0 kgf-m, 50.9 ft. lbs.)
8. Install the front and center exhaust pipes.
NOTE: Always use new gaskets.
9. Install the under cover.