subaru Workshop Repair Guides

Subaru Workshop Service and Repair Manuals

Sensors and Switches - Restraint Systems > < Seat Belt Tensioner|Description and Operation|Page 5507
Page 2
background image

CAUTION When pulling, be sure to hold onto the slide lock and not the male connector or wire

How to connect:

1. Insert female connector (C) over male connector socket (B), and push slide lock (A) into the female connector tabs.

CAUTION: Do not hold onto the slide lock.

2. If the male connector socket is pushed too hard, slide lock (A) will go past slide lock (A) tabs and connect.

Sensors and Switches - Restraint Systems > < Seat Belt Tensioner|Description and Operation|Page 5507