Impreza Coupe FWD F4-1820cc 1.8L SOHC (1995)
(2) Electrical connectors (for stop light switch, etc.)
5) Remove clevis pin which secures pedal to push rod.
6) Remove bolts and nuts which secure brake and clutch pedals, and remove pedal bracket and clutch cable as a unit.
CAUTION: Before removing clutch cable from toe board, remove grommet. Slowly remove clutch cable, being careful not to scratch it.
BRAKE PEDAL (AT model)
1) Disconnect ground cable from battery.
2) Remove instrument panel lower cover from instrument panel.
3) Remove clevis pin which secures brake pedal to brake booster operating rod. Also disconnect stop lamp switch connector.
4) Remove two bolts and tour nuts which secure brake pedal to pedal.
