Impreza Coupe FWD F4-1820cc 1.8L SOHC (1995)
4) Insert piston into cylinder.
CAUTION: Do not force piston into cylinder.
5) Apply a coat of specified grease to boot and fit in groove on ends of cylinder and piston.
Grease:
NIGLUBE RX-2 (Part No.003606000)
To facilitate installation, fit boot starting with piston end.
6) Install boot ring. Be careful not scratch boot.
7) Apply a coat of specified grease to guide pin, outer surface, sleeve outer surface, cylinder inner surface, and boot grooves.
Grease:
NIGLUBE RX-2 (Part No.003606000)
8) Install guide pin boots on caliper body.
9) Install lock pin boots on caliper body and insert lock pin sleeve into place.
Installation