subaru Workshop Repair Guides

Subaru Workshop Service and Repair Manuals

Steering Gearbox|Page 3593 > < Steering Gearbox|Page 3591
Page 3
background image

9) Disconnect pipes C and D from pipe of gearbox.

CAUTION:  Be careful not to damage these pipes.

NOTE:  Disconnect upper pipe D first, and lower pipe C second.

10) Remove clamp bolts securing gearbox to crossmember, and remove gearbox.

Disassembly

DISASSEMBLY 

1) Disconnect four pipes from gearbox.
2) Secure gearbox removed from vehicle in vice using ST. ST 926200000 STAND

CAUTION:  Secure the gearbox in a vice using the ST as shown. Do not attempt to secure it without this ST.

3) Remove tie-rod end and lock nut from gearbox.

4) Remove small clip from boot using pliers, and move boot to tie-rod end side.

Steering Gearbox|Page 3593 > < Steering Gearbox|Page 3591