Impreza GT F4-2.5L Turbo (2009)
3) Remove the trailing link.
Installation
INSTALLATION
CAUTION:
^
Be sure to use a new self-locking nut.
^
Always tighten the bushing in the state where the vehicle is at curb weight and the wheels are in full contact with the ground. Install in
the reverse order of removal.
Tightening torque:
90 N-m (9.2 kgf-m, 66.4 ft-lb)
Removal
Upper Arm
REMOVAL
1) Remove the rear sub frame.
2) Remove the rear ABS wheel speed sensor bracket.
3) Remove the bolts, then remove the upper arm.