Impreza GT F4-25L Turbo (2009) - Automatic Transmission Fluid Line Removal
4) Connect the ATF cooler hose to the pipe on the radiator side.
NOTE:
^
Install so that the hose is not folded over, excessively bent or twisted.
^
Insert the hose to the specified position.
5) Install the heat shield cover.
Tightening torque:
3 N-m (0.3 kgf-m, 2.2 ft-lb)
6) Install the under cover.
7) Install the battery.
8) Fill ATF.
NOTE:
Make sure there are no ATF leaks in joints between the transmission, radiator, pipes, and hoses.