Impreza L Sport Wagon F4-2.2L SOHC (1999)
5M6: GROUNDING CIRCUIT INSPECTION
1. Turn ignition switch "OFF", disconnect battery ground cable and then wait at least 20 seconds.
2. Disconnect connector (AB1) from body harness connector (B31), and connect connector (B31) to test harness A connector (1A).
3. Measure resistance between connector (5A) terminal and chassis ground.
CHECK: Is resistance less than 10 Ohms?
YES:
Go to step 5M7.
NO:
Repair body grounding circuit.
5M7: GROUNDING CIRCUIT INSPECTION
Measure resistance between connector (5A) terminal and chassis ground.
CHECK: Is resistance less than 10 Ohms?
YES:
Go to step 5M8.
NO:
Repair body grounding circuit.
5M8: INSPECTION OF AIRBAG MAIN HARNESS
1. Connect connectors (AB1) and (B31). Disconnect connector (AB6) from airbag control module and connect it to test harness I connector (1I).
2. Measure resistance between each test harness I connector (2I) terminal and chassis ground.
