Impreza WRX STI F4-2.5L DOHC Turbo (2007)
Except Non-turbo model and STI model
2) Insert the piston into operating cylinder.
3) Install the push rod to boot.
4) Install the boot and push rod to operating cylinder.
^
Non-turbo model
Non-turbo Model
^
Except Non-turbo model and STI model
Except Non-turbo model and STI model
INSPECTION
1) Check the operating cylinder for damage. If operating cylinder is damaged, replace it.
2) Check the operating cylinder for fluid leakage or damage on boot. If any leakage or damage is found, replace the operating cylinder.
