Impreza WRX STI F4-2.5L DOHC Turbo (2007)
7. Apply primer to adhesive layer of body.
Painted surface primer:
Dow Automotive
ESSEX U-413 or equivalent
NOTE:
-
Primer once attached to painted surface of the body and internal trim is hard to wipe off. Mask the circumference of such areas.
-
Let the primer dry for about ten minutes before installing the glass.
-
Do not touch the surface coated with primer.
8. Cut off the cartridge nozzle tip as shown and set it in sealant gun.
9. Apply adhesive to the glass end surface as shown.
