Impreza WRX STI F4-2.5L Turbo (2008)
5) Connect the stop light switch connector.
6) Check that the brake light operate properly.
7) Check the brake pedal after installation.
INSPECTION
1) Move the brake pedal pads in a horizontal direction with a force of approx. 10 N (1 kgf, 2 lbs.), and check that the pedal deflection is in the range
of specifications.
CAUTION: If excessive deflection is noted, replace with a new bushing.
Deflection of brake pedal:
Service limit 5. 0 mm (0.197 inch) or less
2) Check the position of the pedal pad.
Pedal height L: 150 - 160 mm (5.91 - 6.29 inch)
Brake pedal free play A:
0.5 - 2 mm (0.020 - 0.079 inch) [When pulling the brake pedal upward with a force of less than 10 N (1 kgf, 2 lbs.).]