Impreza WRX STI F4-2.5L Turbo (2008)
Tightening torque: 18 Nm (1.8 kgf-m, 13.0 ft. lbs.)
2) Install clevis pin and snap pin which secure the operating rod to the brake pedal.
NOTE:
^
Replace with a new clevis pin.
^
Apply a thin coat of KOPR-KOTE (Part No. 003603001) to the clevis pin.
3) Make sure that the switch clip (gray) is securely installed to the brake pedal bracket.
4) While pulling up the brake pedal, insert the stop light switch to the stopper (brown) at the brake pedal side until it stops. Turn the stop light switch
clockwise and install the switch.
