subaru Workshop Repair Guides

Subaru Workshop Service and Repair Manuals

Disconnection and Connection|Page 5497 > < Side Airbag Module|Page 5494
Page 1
background image

Side Air Bag: Service and Repair
Disconnection and Connection

Driver's Airbag, Side Airbag and Pretensioner Connector

OPERATION

DRIVER'S AIRBAG, SIDE AIRBAG AND PRETENSIONER

How to disconnect:

1. Push lock arm (A).

2. With lock arm (A) pushed in, move slide lock (B) in the direction of the arrow.
3. With slide lock (B) pulled, remove lock arm (A) to its original position, and then pull in the direction of the arrow and separate the connector.

CAUTION:  When pulling, be sure to hold onto the connector and not the wire.

How to connect:

Holding the connector, and push it in carefully until a connecting sound is heard.

CAUTION:  Be sure to insert the connector in until it locks. Then pull on it gently to make sure that it is locked.

Front Sub Sensor and Side Airbag Sensor Connectors

OPERATION

FRONT SUB-SENSOR, SIDE AIRBAG SENSOR

How to disconnect:

Disconnection and Connection|Page 5497 > < Side Airbag Module|Page 5494