subaru Workshop Repair Guides

Subaru Workshop Service and Repair Manuals

Seat Belt Tensioner|Service and Repair > < Ignition System - DTC's P0301/P0302/P0303/P0304|Page 5702
Page 1
background image

Seat Belt Tensioner: Service Precautions

Disposal of Pretensioner

CAUTION:

-

Do not discard undeployed pretensioners, because they may cause serious personal injury when accidentally deployed.

-

Deployment of the airbag should be done on a flat place free from any possible danger. Avoid deploying outdoors during rainy or windy weather.

-

Do not drop or damage pretensioner.

-

Because deploying the airbag module causes a high-explosive noise, be sure to warn people in the area, and do not allow anyone within a 5-meter
(16 ft)
 radius of the disposal site.

-

Some smoke will be emitted after deployment of the airbag module. Therefore, it must be deployed in a well-ventilated area with no smoke alarms
nearby.

-

Wear gloves, goggles, and earplugs during this operation. Wash your hands afterwards.

-

After deployment, the pretensioner is especially hot. Leave it unattended for 40 minutes, and then discard it.

-

Do not let water get on the deployed pretensioner.

-

Wrap the deployed the pretensioner in an airtight vinyl bag, and then discard it.

Seat Belt Tensioner|Service and Repair > < Ignition System - DTC's P0301/P0302/P0303/P0304|Page 5702