subaru Workshop Repair Guides

Subaru Workshop Service and Repair Manuals

M/T - Pops Out of Reverse gear|Page 3755 > < M/T - Pops Out of Reverse gear|Page 3749
Page 1
background image

Mainshaft: Customer Interest
M/T - Pops Out of Reverse gear

NUMBER: 03-49-02R 
DATE: 04/23/04

APPLICABILITY:
1999-2002MY Subaru Vehicles With Manual Transmission

SUBJECT: 
Popping Out of Reverse

INTRODUCTION

This bulletin replaces the previous bulletin, 03-49-02. Please discard all copies of the previous bulletin.

If you encounter a customer complaint of vehicle popping out of reverse, refer to the appropriate section of the applicable MY Service Manual for
proper diagnosis. If diagnostic procedures are exhausted, the cause may be excessive incline by free-play inside the gear and hub assembly, and reverse
gear dimension. As you encounter this customer complaint, use the chart for counter measure parts. Modified parts are now available which have
reduced tolerances inside the gear and hub assembly; and the reverse gear dimension has been changed.

PARTS LIST

M/T - Pops Out of Reverse gear|Page 3755 > < M/T - Pops Out of Reverse gear|Page 3749