subaru Workshop Repair Guides

Subaru Workshop Service and Repair Manuals

ABOUT US
Sensors and Switches - M/T > < M/T - Pops Out of Reverse gear|Page 3771

Legacy Outback Ltd Sedan F4-2.5L SOHC (2000)

Page 1
background image

Reverse Idler Gear: Adjustments

Reverse Idler Gear Position

Adjustment of reverse idler gear position

Reverse idler gear to transmission case (Left-Hand) wall clearance: 6.0 - 7.5 mm (0.236 - 0.295 inch) 

After installing a suitable reverse shifter lever, adjust reverse idler gear to transmission case wall clearance to within 0 to 0.5 mm (0 to 0.020 inch)
using washers.

Sensors and Switches - M/T > < M/T - Pops Out of Reverse gear|Page 3771