Legacy Outback Ltd Sedan AWD F4-2.5L SOHC (2001)
9. Connect the other terminal of deployment tool to the battery plus terminal. Then deploy the pretensioner.
CAUTION:
-
Alter deployment, pretensioner is especially hot. Leave it unattended for 40 minutes.
-
Do not let water get on the deployed pretensioner.
10. Remove outer belt (front). <Ref. to REMOVAL, Front Seat Belt.>
11. Wrap the deployed pretensioner in an airtight vinyl bag, and then discard it.
Deploying After Removal From Vehicle
1. Fold backrest all the way forward, then move front seat all the way forward.
2. Turn ignition switch OFF, disconnect the ground cable from the battery, and wait for more than 20 seconds before starting work.
3. Remove outer belt (front). <Ref. to REMOVAL, Front Seat Belt.>
4. Cut off seat belt as close to retractor as possible.
5. Short terminal to alligator clip furnished as a deployment tool.
Deployment tool: (Part No. 98299PA030)
