Outback F4-2.5L DOHC Turbo (2006)
1. Check the seal (A) is securely installed in baffle plate in the direction as shown in the figure.
2. Install the baffle plate.
Tightening torque: 6.4 Nm (0.65 kgf-m, 4.7 ft. lbs.)
3. Install the oil strainer onto baffle plate.
NOTE: Replace O-ring with new one.
Tightening torque: 10 Nm (1.0 kgf-m, 7.0 ft. lbs.)
4. Apply liquid gasket to the mating surfaces and install the oil pan.
